Surface Treatments
BASF PRODUCTS
PARCHEM PRODUCTS
- Concure A99 – Water based acrylic curing compound – conforms to AS3799
- Concure WB30 - Water based wax emulsion, curing compound – conforms to AS3799 / potable water suitable
- Concure HR90 – Hydrocarbon resin based curing compound – conforms to AS3799 / hot pour asphalt suitable
- Reebol WB – Water based formwork and mould release agent
- Form Release Agent – Economical, general purpose formwork and mould release agent
- Nitoflor Lithurin - Liquid floor hardener / dustproofer
Protect Crete are manufacturers of the world’s most technically advanced systems for permanent concrete repair, moisture proofing and protection treatments. The extensive product range has been uniquely formulated to provide you with a cost effective, safe and permanent solution that will stand the test of time
- Densi-Proof 1 is a spray applied single pack liquid cure and seal / moisture barrier for cementitious substrates prior to the application of coatings, adhesives or toppings.
- Moisture-Fix 1 is a broom applied single pack liquid moisture barrier for cementitious substrates prior to the application of coatings, adhesives or toppings.
- Moisture-Fix 2 is a single pack liquid moisture barrier used when timber or strip flooring is batten fixed or loose laid or indeed any flooring that is loose laid.
SURFACE TREATMENTS FROM SIKA
- Formol – chemical release agent for concrete formwork.
- Antisol HR – hydrocarbon resin based curing compound that meets AS3799.
- Antisol WB – wax based curing compound that meets AS3799.
- Purigo 5S – surface binder and dustproofer.
- SikaFloor-CureHard-24 – transparent surface hardener, dustproofer, sealant and curing compound for concrete.
- Rugasol® C – Concrete surface retarder for horizontal surfaces (Normal)
- Rugasol® MH – Concrete surface retarder for horizontal and vertical surfaces
Concrete must be properly cured by adequate retention of mixing water to ensure proper hydration and specified strength. Thompson White Australia have produced a number of concrete curing compounds to meet any requirement and been used on some of the largest concrete structures in Australia.
- Curecon W – Waterbased Resin curing compound that meets AS3799/RTA3203
- Curecon A – Waterbased Acrylic curing compound that meets AS 3799.
- Rendacure – High solids, PVA based curing compound for concrete
- Stripform – Oil based form release agent
