Cementitious Repair

rapid hardening and drying external repair mortar.

a rapid hardening and drying internal repair mortar.

Significantly increase the fluidity of the mixture.

Slows down the setting time of cement allowing you more time to place and finish your concrete, mortar, and grout materials.

workable, high quality concrete material that is ideal where rapid strength gain, high durability and low shrinkage are required in thicknesses ranging from 50mm to 600mm.

workable high quality mortar designed for rapid strength gain and high durability for vertical and overhead applications of 12mm to 150mm.

Multipurpose rapid setting Class C non shrink grout that can be used in a variety of applications from feather edge to 100mm.

Shrinkage compensated repair mortar for concrete strengths of 30-45 MPa
suitable for use with embedded
galvanic anodes

High strength, shrinkage controlled, polymer modified, fluid micro-concrete for structural repairs of all types conforming to the requirements of EN 1504-3 Class R4.

High strength, high build, high resistivity, shrinkage compensated repair mortar conforming to EN1504-3 Class R4.

High build, high resistivity, shrinkage compensated repair mortar conforming to EN1504-3 Class R3.

Economical, class A shrinkage compensated grout – (gaps: 10 mm to 100 mm thickness).

Formulated anti-wash out, specialist grout for underwater grouting applications.

High flow, high ultimate strength, dual shrinkage compensated, precision cementitious grout.

High early strength, rapid setting, flowable, cementitious precision grout.

High fluid flow, dual shrinkage compensated, precision grout – (gaps 10 mm to 125 mm thickness).

General purpose, high flow, Class A shrinkage compensated grout – (gaps 10 mm to 100 mm thickness).

Flowable, precision cemetitious grout for high volume and deep pours – (gaps 20 mm to 500 mm thickness).

High flow, dual shrinkage compensated, precision cementitious grout.

High strength high flow grout for large void fill applications.