Projects

Requirements: The scope called for a high level waterproofing system with bullet proof reliability. Solution: The Ardex Weldtec system was chosen as the sheet membrane solution for this project. The Weldtec sheet guarantees film thickness, all joints are heat

Requirements: The scope called for a fully adhered high performance sheet membrane system for a suspended deck with habitable rooms directly below. Solution: The Ardex Weldtec system was chosen as the waterproofing solution for this project. It can be considered the ultimate

Requirements: The scope called for high performance self adhesive sheet system to waterproof a suspended deck with living areas directly below the deck. Solution: Gripset BRW PFN was chosen as the waterproofing solution for this project as it performs particularly well in suspended

Requirements: The scope called for a protective coatings system with excellent long term protection of structural steel in a highly aggressive environment. Solution: Denso Australia was chosen to provide the multi layer system. Past performance of previous Denso systems in similar environments

Requirements: The scope called for a high performance self adhesive membrane to eliminate pinholing and difficulties with maintaining accurate liquid membrane film thicknesses. Solution: Fosroc was chosen as the manufacturer due to their extensive experience with self adhesive membranes. Surface preparation

Requirements: The scope called for commercial resurfacing solution with non slip characteristics developed for severe service conditions. Solution: Hychem International was chosen as the manufacturer due to their 30 years experience in specialised resin flooring systems for the Australian service industry. Surface preparation required

Requirements: To educate and train staff and selected contractors in the Sika Carbon Fibre system. Solutions: Sika technical staff demonstrated the use of the Sika Carbodur and Sika Wrap systems.  This included the practical use of structural epoxies to bond and correctly apply

Requirements: The scope called for a protective coating system to provide chemical resistance with outstanding gloss. Solution: Lacnam Paints was selected as the paint manufacturer of choice due to its strong background in industrial applications and ease of use. The steel was blasted to SP 5

Requirements: The scope called for a pipe protective coating system with outstanding chemical resistance and high abrasive resistance when backfilled. Solution: The pipe was abrasive blasted to SP 5 / NACE No.2 near white blast and coated with Chemclad – an epoxy with

Requirements: The scope called for a Sydney Water approved coating system suitable for sewage treatment.  The system requirements included both high chemical and abrasive resistance. Solution: Sika was selected as the manufacturer for the products of this project.  The concrete substrate as grit

Requirements: The scope called for an integral protective coating sytem that provided long term durability of concrete and reinforcing in harsh environmental conditions. Solution: Oxtek Australia was chosen as the manufacturer due to their experience in integral concrete waterproofing projects. A site inspection involving the manufacturer,

Requirments: The scope called for a premium quality, decorative epoxy flake floor system. The system was required to be durable enough for heavy traffic and have good UV stability. Solution: Hychem International was selected as the manufacturer of the products for this project.