Gripset Xpress Multi Pro Membrane
A new level of next generation waterproofing technology for water based membrane systems, providing fast cure properties that are unique in low temperature and high relative humidity environments.
Xpress Multi Pro Membrane represents a new level of next-generation waterproofing technology for water-based membrane systems, providing fast-curing properties that are unique in low-temperature and high-relative-humidity environments.
Designed for both under-tile and exposed applications subject to UV exposure, Xpress Multi Pro enables installation and operation under full-service conditions in a fraction of the time of any other water-based liquid membrane system. Xpress Multi Pro overcomes traditional shortfalls of current water-borne systems, including prolonged drying times, susceptibility to re-emulsification after early water ponding, and washout after rain.
Based on hybrid polymer technology, Xpress Multi Pro provides an elastomeric membrane that is a safe alternative to hazardous solvent based and moisture cured membrane coatings.
Further time efficiencies are gained when this membrane is used with Xpress Primer H2O Plus for priming/sealing roof areas and damp and green mineral substrates containing residual moisture. With a one-hour dry time, Primer H2O Plus can be overcoated in significantly less time than traditional two-part epoxy-based vapour barriers.
Enabling project flow with minimal delays, rapid re-coat times, and the ability to subject the final membrane film to early water exposure, the Xpress Multi Pro Membrane is part of the next-generation Gripset technology that continues to add value for waterproofing professionals and building projects with standalone waterproofing innovations.
Features & Benefits
- Ultra-rapid drying and curing properties – forms a rain-resistant finish in less than 1 hour
- Withstands early ponding water and permanently wet conditions without re-emulsification or blistering after 3 hours of application
- Suitable for under-tile and fully exposed UV applications
- Class III membrane to AS4858 and AS4654
- Excellent adhesion properties
- Outstanding weather-resistant properties
- Resistant to fungi and algae
- Low dirt retention
- Lightfoot trafficable
- Solvent-free, non-hazardous
Application
Xpress Multi Pro is suitable for commercial, industrial and residential applications.
Waterproofing Uses
- Roofs as an exposed membrane finish
- Roofs to be covered over with screeds and toppings
- Internal wet areas, bathrooms, laundries and tiled areas
- Balconies, decks, podiums, terrace floors
- Box gutters
- Parapets
- External surfaces exposed to constant weather
Substrates
- Concrete, render, cement screed and masonry
- Fibre cement sheeting, plasterboard and structural sheeting
- Wet area timber sheeting and external grade plywood
- Aerated concrete panels and blocks
For further information on suitable surfaces and substrates, contact the technical department of Gripset Industries for correct advice on surface preparation and suitability.
Packaging
15 litre pails
Product specification sheet
Gripset Xpress Multi Pro Membrane product specification sheet opens in a new windowManufacturer
Gripset Industries
