Multithane 2P – A80

two part, elastomeric, heavy duty, trafficable, abrasion reistant, uv resistant, low VOC, polyurethane waterproofing membrane.

Multithane 2P-A80 is a two part, elastomeric, heavy duty, trafficable, abrasion reistant, uv resistant, low VOC, polyurethane waterproofing membrane.

Multithane 2P-A80 is formulated to provide a high tensile, puncture and tear-resistant waterproofing membrane suitable for pedestrian and vehicular traffic.

Multithane 2P-A80 is usually top coated with Multithane ATC A80 (aliphatic top coat), which is a tough, abrasion-resistant, UV and colour-stable top coat.

Uses

Multithane 2P-A80 is designed and formulated for use on:

• Exposed roofs
• Balconies, decks, podiums, terraces and concrete slabs
• Car park decks and ramps
• Planters and landscape areas
• lant rooms and washrooms
• Laboratory and kitchen floors
• Sports stadiums
• Walk-ways, passageways and pedestrian access areas
• Impact-resistant internal flooring

Note: For exposed areas, Multithane 2)-A80 must be top coated with Multithane ATC-A80.

Suitable Surfaces

Multithane 2P-A80 is suitable for use on most dry, sound and properly prepared and primed construction substrates such as:

• Concrete and cementitious surfaces
• Block-work, brick-work and Hebel block
• Masonry
• Timber

Note: Surfaces must be dry or have a low moisture content (max. 5%), clean, free of dirt, friable matter, oils, grease, concrete release and curing agents, efflorescence and other contaminants.

Benefits and Advantages

Multithane 2P-A80 is a highly technologically advanced polyurethane waterproofing membrane system and is:

• Highly flexible – + 400% (meets CSIRO Class 111)
• Low VOC – meets Greenstar criteria
• Seamless
• Fully bonded. Does not allow water to track between the substrate and the membrane
• Puncture and tear-resistant
• Abrasion resistant
• Suitable for pedestrian and vehicular traffic
• Can be made non-slip
• Resistant to ponded water
• Chemically resistant
• Tolerates a wide temperature range (± -30ºC to 120ºC)
• Easy to apply

Packaging

Primer: Duram Primeseal SP- 4 litre and 15 litre pails

Membrane: Multithane 2P-A80 in 20kg kits

Top Coat: Multithane ATC-A80 in 15 litre pails

Colours

Usually supplied in grey, but can be supplied in other colours. Minimum quantities may apply.

Product specification sheet

Manufacturer

Duram

Duram Industries Pty Ltd, a 100% Australian owned company, has manufactured on site a comprehensive range of waterproofing for almost 30 years ensuring that you can select the correct product for a given waterproofing application.