Multithane ATC

single pack, aliphatic polyurethane waterproofing top coat.

Duram Multithane ATC is a single pack, aliphatic polyurethane waterproofing top coat which has been formulated as a complimentary and compatible top coat for Multithane UV and Duram 195. Aliphatic technology provides greater UV protection, colour fastness, and anti-chalking properties. It is also designed to extend the life of exposed aromatic polyurethanes. Multithane ATC forms a tough, flexible, seamless, highly UV-stable, waterproof coating.

Uses

Multithane ATC is primarily formulated as a highly UV-stable top coat over Multithane UV and Duram 195 to give greater long-term UV protection and colour fastness, thereby extending the waterproofing membrane’s life and performance.

Suitable Surfaces

Multithane ATC has been formulated as a top coat over Multithane UV and Duram 195.

Limitation

Suitable for maintenance foot traffic and not intended as a general trafficable membrane.

Benefits and Advantages

Multithane ATC represents the highest standards in aliphatic polyurethane waterproofing technology and provides the following benefits and advantages:

• Compatible with Multithane and Duram 195 waterproofing membranes
• Provides excellent UV protection
• Extends the life of the waterproofing membrane system
• Single pack – no mixing
• Fast curing (usually within 24 hours
• Permanently flexible
• Suitable for immersion in water
• Good chemical resistance
• High strength and puncture-resistant
• Provides seamless membrane (no joints or laps)
• Easily repaired and or maintained
• Odourless (subjective) when cured
• Formulated to provide long-term protection
• Tar free- does not bleed
• Easy to apply
• Has good hydrostatic resistance
• Usually grey but can be made in other colours (minimum quantities apply)

Precautions in Use

When properly used, risk is considered low, but precautions should be observed on cans, labels, and/or data sheets. Do not use it in confined areas with poor ventilation. Uncured products are flammable.

Colours

Generally grey. It can be manufactured in some other colours, but minimum quantities may apply.

Product specification sheet

Manufacturer

Duram

Duram Industries Pty Ltd, a 100% Australian owned company, has manufactured on site a comprehensive range of waterproofing for almost 30 years ensuring that you can select the correct product for a given waterproofing application.