Multithane UV
single pack, liquid applied, moisture curing, self levelling, waterproofing membrane
Multithane UV is a single-pack, liquid-applied, moisture-curing, self-levelling, waterproofing membrane that cures to form a seamless, tough, durable, elastomeric (class 3 ) waterproofing membrane. Multithane UV incorporates UV stabilisers and UV absorbers to enable the product to provide greater UV protection and stability than conventional aromatic polyurethane membranes. Multithane UV bonds well to most suitably primed building substrates and is suitable for above and below-ground applications.
Colour: Grey. Available in other colours by special order and minimum quatities apply.
Multithane UV is also available in a thicker grade (Vertical Grade) for exposed vertical surfaces.
Uses
Multithane UV is designed to waterproof most applications within the building and construction industry, including:
Exposed Areas: Roofs, decks, terraces, balconies, podiums and gutters.
Tiled or Covered Areas: Shower recess & wet areas (floors and upturns), decks, balconies, terraces, podiums, retaining walls, planters & landscaped areas, structural slabs, tanks, pits, bunding areas and water features.
Suitable Surfaces
Multithane UV is suitable for most building substrates including:
- Concrete
- Cement
- Cement Render
- FC and CFC Sheeting
- Render
- Brick
- Block work
- Plaster Board
- Masonry
- Bitumen (when primed with Duram Primeseal)
- Metal
- Timber, Particle Board and Plywood ( when primed with Duram Primeseal).
Surfaces must be made good and should be sound, stable, dry, clean, free of dirt, dust and contaminants and suitably primed.
Benefits and Advantages
Multithane UV represents the highest standards in polyurethane waterproofing technology and provides the following benefits and advantages:
- Single pack – no mixing
- Fast curing within 24 hours)
- Suitable for direct sunlight exposure
- Permanently flexible ( tests show flexibility > 500% – Class 3 [highest class of extensibility])
- Will not stain tiles or grout – as Multithane UV is tar and bitumen-free
- Self-levelling and seamless membrane (no joints or laps)
- Suitable for immersion in water
- Can be directly tiled (broadcasting of sand into a final wet coat is recommended)
- Good chemical resistance
- High strength and puncture-resistant
- Easily repaired and or maintained
- Odourless (subjective) when cured
- Formulated to provide long-term protection
- Easy to apply
- Has good hydrostatic resistance
- Long history of Australian use
Colours
Generally Grey. The colour may lighten after application. Other colours may be available, but minimum quantities apply.
Product specification sheet
Multithane UV product specification sheet opens in a new windowManufacturer
Duram
