X220 Moisture Fix

Integral waterproofing and densifying of new and in place concrete.

X220 Moisture Fix® a single pack one application spray on or pour and broom system that deeply penetrates new or existing concrete, provides curing, permanent waterproofing, and protection. X220 Moisture Fix® can be applied to existing concrete with a high moisture content.

The application of X220 Moisture Fix® at time of the concrete pour will cure concrete to provide the hardened properties equivalent to that of water pond curing, permanently waterproof concrete from any direction, making the concrete impermeable and increasing its longevity whilst providing a penetrative moisture barrier system for impervious coatings and coverings.

Adopting the use of X220 Moisture Fix® at time of the concrete pour as an effective curing regime, will significantly reduce the incidence of dry shrinkage cracking, providing a hardened, denser and dust proof concrete, compatible with subsequent flooring or coating applications.

Typical Applications

Example for areas of use are as follows: Concrete substrates prior to application of topical coatings or coverings.

Features and Benefits

Some features and benefits of X220 Moisture Fix® include the following:

• Colloidal silicate used to cure, harden, and densify concrete.
• Permanently waterproofs concrete from any direction.
• Makes concrete impermeable, increasing longevity.
• Increases surface tensile & compressive strength.
• Reduces dry shrinkage cracking.
• Provides a hardened, abrasion resistant, dust-proof surface.
• Retards efflorescence.
• Stabilises pH.
• Improved chemical resistance and protection.
• Used on horizontal or vertical substrates.
• Low VOC, environmentally friendly and user safe. HACCP approved.
• Will purge contamination if present in existing concrete.
• Doesn’t form a membrane – After trade friendly (Epoxy, Adhesives, Screeds, Levelling Compounds)
• Compatible with most floor coverings, coatings and line marking paints.
• UV Resistant.
• Minimum site disruption and trafficable after 2 hours.
• Test reports available on request.

Available in 5, 15, 200 and 1,000 litre containers.

Product specification sheet

Manufacturer

Oxtek Australia

Protect Crete are manufacturers of the world's most technically advanced systems for permanent concrete repair, moisture proofing, moisture barriers and protection treatments. Our extensive product range has been uniquely formulated to provide you with a cost effective, safe and permanent