Protective Undercoats
Protective Undercoats are designed to be applied to prepared substrates for two main reasons. Firstly to provide adhesion to the substrate for the mid and / or topcoat. Secondly they provide corrosion protection through the use of anti corrosive additives and through the formation of a barrier between environmental conditions and the substrate they are protecting.
Hychem International
Jotun
Tankguard Storage
Two-component, high solid phenolic epoxy coating with high resistance to a wide range of chemicals and solvents.
Tankguard 412
Two component, solvent-free epoxy tank coating.
Resist 86 AU
Two-pack, zinc-rich ethyl silicate based coating.
Penguard HB
Two component, high build epoxy coating based on epoxy resin with high molecular weight.
Penguard Express ZP
Two component, fast drying, high solids, zinc phosphate pigmented epoxy coating.
Penguard Express MIO
Two component, fast drying, high solids micaceous iron oxide pigmented epoxy coating
Penguard Express
Two component, fast drying, high solids two-pack epoxy coating.
Marathon
Two-component, high solids, epoxy coating reinforced with glass flakes.
Jotaprime 505
Two component, pamine adduct cured, non-inhibitive epoxy primer.
Jotaprime 265
Rapid drying, semi-gloss alkyd based primer/finish with active anti-corrosive pigmentation.
Jotaprime 250
High build air drying primer with enhanced zinc phosphate pigments.
Jotamastic 87 Aluminium
Two component surface tolerant, abrasion resistant, high solids polyamine cured epoxy mastic coating with Aluminium.
Jotamastic 87
Two-pack surface tolerant, abrasion resistant, high solids, polyamine cured epoxy mastic coating.
Jotacote Universal
Two-pack, abrasion resistant, high solids polyamine cured pure epoxy based primer/finish coat.
Dimetcote 18 Slurry
two-pack, zinc-rich ethyl silicate based coating.
Dimetcote 15 Slurry
Two-pack, zinc-rich ethyl silicate based coating.
