Protective Undercoats
Protective Undercoats are designed to be applied to prepared substrates for two main reasons. Firstly to provide adhesion to the substrate for the mid and / or topcoat. Secondly they provide corrosion protection through the use of anti corrosive additives and through the formation of a barrier between environmental conditions and the substrate they are protecting.
Lanotec
Lanotec Citra-Force
A powerful, all purpose, natural cleaner / degreaser concentrate. It can be used to remove Lanotec products.
Lanotec General Purpose
Corrosion inhibitor, penetrant, lubricant and rejuvenator.
Lanotec Heavy Duty
Marine grade corrosion inhibitor, lubricant and spray on anti seize
Lanotec Steel Seal
Lanolin based corrosion inhibitor particularly suited to marine applications.
Lacnam
724 High Build Iso Free
two-pack amine-epoxy functional acrylic zinc phosphate primer
605 Zinc Rich Primer
Two pack inorganic zinc rich primer.
210 Metalprime
Single pack alkyd zinc phosphate primer.
212 Metal Clean
212 Melat Clean is a phosphoric acid base solution, used as a pre-treatment for metal surfaces before protective coatings are applied.
215 Anticorrosive Primer Topcoat
alkyd based coating containing zinc phosphate and selected raw materials in order to give maximum anticorrosive properties in one application.
221 High Build Primer
Zinc phosphate, high build anticorrosive alkyd primer (rheology modified).
260 Keycoat
260 Key-Coat is an epoxy-vinyl zinc phosphate etch primer that promotes the adhesion of various topcoats.
284 GP Epoxy Zinc Phosphate
Two pack epoxy zinc phosphate primer
285 S.T. Epoxy
285 S.T. Epoxy is a two pack surface tolerant epoxy polyamine primer / topcoat.
722 Iso Free
Two pack isocyanate free acrylic primer
Parchem Construction Supplies
Hychem International
Hychem E100SS
A low viscosity, low solids epoxy primer designed to increase adhesion of epoxy coating systems
to steel. E100SS can also be used on substrates where high penetration is required.Hychem TL9
A Novolac epoxy lining specifically formulated for resistance to 98% sulphuric acid but is also suited to 30% hydrochloric, 40% phosphoric and 20% nitric acid solutions.
